Husqvarna P524 - Technical Data; Machine Dimensions; Engine Specifications; Electrical System Specifications

English – 41
Technical data
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output
for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
P524
Dimensions
Unladen weight excluding cutting unit, kg/lb 412/908
Tyre dimensions 18 x 8,5 x 8
Air pressure, rear - front, kPa / bar / PSI 100/1,0/14,5
Engine
Brand Kawasaki, V-Twin
Model FX691V-KME09023
Nominal engine output, kW (see note 1) 13,9
Displacement, cm
3
/cu.in 726/43,3
Fuel, minimum octane grade lead-free 95 (max. methanol 5%, max. ethanol 10%, max. MTBE 15%)
Tank volume, litres/USqt 22/23
Oil, API class CD or better SAE 10W/40
Oil volume incl. filter 2,1/2,2
Oil volume excl. filter, litres/USqt 1,8/1,9
Max.motor speed, r/min 3000 ± 75
Starting Electric starter
Electrical system
Type 12 V, negative earthed
Battery 12 V, 24 Ah
Spark plug NGK BPR4ES
Electrode gap, mm/inch 0,75/0,030
Main fuse, A 20
Bulbs, halogen 2x12V 20W
Hydraulic System
Max. working pressure, bar / psi 120 / 1740
Hydraulic tank capacity, l/USqt 8/8,5
Hydraulic system capacity, l/USqt 13/13,7
Transmission
Brand Kanzaki KTM 23
Oil, class API SM, ACEA A3/B4 SAE 10W/50 Synthetic
Oil capacity gearbox front, l/USgal 0,9
Oil capacity gearbox rear, I/USgal 0,9
Cutting unit
Model
Combi 103
Combi 112
Combi 122