English
–
5
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
W
ARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
This product is in accordance with applicable
EC directives.
Fast
Slow
Stop the engine.
Choke.
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Parking brake
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter and
on the label.
Clutch in
Clutch out
Warning: rotating parts. Keep hands and feet
clear.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons, especially
children, or animals, are in the vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is
fitted
Brake
Switch off the engine and take off the ignition
cable before repairs or maintenance
Check the engine’s oil level
Check transmission oil level
To Next Page
Loading...
