English – 19
DRIVING
Driving the machine
1. Release the parking brake by pressing down the
brake pedal.
3. Select the required cutting height (1-9) with the
cutting height lever.
To obtain a uniform cutting height it is important
that the tyre pressures are equal on both front
wheels 60 kPa/8.5 PSI.
2
1
2. Carefully press down one of the pedals until the
correct speed is reached.
To drive forwards: press down pedal (1).
To reverse: press down pedal (2).
6017-012
6017-214A
6017-151
To Next Page
Loading...
