EasyManuals Logo

Husqvarna TC 238T User Manual

Husqvarna TC 238T
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Keep bystanders away.
The fire symbol shows a risk, which, if
not obeyed, can cause death, serious
injury and/or damage.
Sound power level.
The product agrees with the applicable
EC directives.
This product conforms to the applicable
UK regulations.
Keep hands and feet
away from this area.
Do not operate the prod-
uct on slopes that are
more than 15°.
Hot surfaces. Do not
touch.
Hand entanglement.
Drawbar load.
Do not operate the product without a grass catcher
or a deflector.
Freewheel (automatic models only).
Hour meter
The hour meter shows how many hours the engine
has been in operation. Refer to
Product overview on
page 3
for the position of the hour meter.
Each 50 hours an oil level symbol will show for 2
hours. Refer to
Lubrication schedule on page 23
.
To manually reset the hour meter, turn the ignition
key to the on position and then to the "STOP"
position 5 times.
Note: The hour meter only stops when the ignition
key is in the "STOP" position. Make sure that the
ignition key stays in the "STOP" position when the
engine has stopped.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not
from the manufacturer or not approved by the
manufacturer.
the product is not repaired at an approved
service center or by an approved authority.
Euro V Emissions
WARNING:
Tampering with the
engine voids the EU type-approval of
this product.
2010 - 003 - 10.04.2023 5

Other manuals for Husqvarna TC 238T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna TC 238T and is the answer not in the manual?

Husqvarna TC 238T Specifications

General IconGeneral
Engine ManufacturerBriggs & Stratton
Engine NameIntek
Cylinder1
Fuel TypeGasoline
Transmission TypeHydrostatic
Net Power RPM2600 rpm
Oil FilterYes
Transmission ManufacturerTuff Torq
Transmission ModelK46
Cutting Height Steps6
Blade EngagementElectric
Blades2
Nose WheelNo
CollectorIncluded
Mulch KitAvailable as accessory
Cutting Width38 in
Cutting Height Max4 in
Fuel Tank Volume2.5 gal (US)
Tire Size Front15x6-6"
Tire Size Rear20 x 10.00-8
Wheelbase48 in
Turning Radius0 cm
Uncut Circle0 cm
Power Output6.5 kW (8.7 hp)

Related product manuals