EasyManuals Logo

Husqvarna TC 242T User Manual

Husqvarna TC 242T
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Keep bystanders away.
The fire symbol shows a risk, which, if
not obeyed, can cause death, serious
injury and/or damage.
Sound power level.
The product agrees with the applicable
EC directives.
This product conforms to the applicable
UK regulations.
Keep hands and feet
away from this area.
Do not operate the prod-
uct on slopes that are
more than 15°.
Hot surfaces. Do not
touch.
Hand entanglement.
Drawbar load.
Do not operate the product without a grass catcher
or a deflector.
Freewheel (automatic models only).
Hour meter
The hour meter shows how many hours the engine
has been in operation. Refer to
Product overview on
page 3
for the position of the hour meter.
Each 50 hours an oil level symbol will show for 2
hours. Refer to
Lubrication schedule on page 23
.
To manually reset the hour meter, turn the ignition
key to the on position and then to the "STOP"
position 5 times.
Note: The hour meter only stops when the ignition
key is in the "STOP" position. Make sure that the
ignition key stays in the "STOP" position when the
engine has stopped.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not
from the manufacturer or not approved by the
manufacturer.
the product is not repaired at an approved
service center or by an approved authority.
Euro V Emissions
WARNING:
Tampering with the
engine voids the EU type-approval of
this product.
2009 - 003 - 10.04.2023 5

Other manuals for Husqvarna TC 242T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna TC 242T and is the answer not in the manual?

Husqvarna TC 242T Specifications

General IconGeneral
Engine ManufacturerBriggs & Stratton
Cylinder Displacement656 cm³
Cylinders2
Transmission TypeHydrostatic
Transmission ManufacturerTuff Torq
Cutting Width107 cm
Collector Volume320 l
Oil FilterYes
Nose RollerYes
Seat MaterialVinyl
Seat Back HeightHigh
Hour Meter TypeDigital with pre-programmed service intervals
Mulch KitIncluded
Fuel Tank Volume11.5 L
Cutting MethodsCollect, Mulch, Side discharge
Engine Lubrication TypeFull pressure
Front Tire Size15x6-6
Wheelbase121.9 cm

Related product manuals