EasyManua.ls Logo

Husqvarna TE 150i 2022 - User Manual

Husqvarna TE 150i 2022
169 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL 2022
TE 150i
Art. no. 3402537en

Table of Contents

Questions and Answers

  • M
    Maria WilsonAug 21, 2025
    Why won't my Husqvarna TE 150i 2022 Motorcycle engine crank (starter motor)?
    • C
      Cole SextonAug 21, 2025
      If the starter motor on your Husqvarna Motorcycle isn't cranking the engine, it could be due to a few reasons. You might not be following the correct start procedure. The 12-V battery could be discharged, requiring you to charge it and check the charging voltage, open-circuit current, and the alternator's stator winding. A blown main fuse could also be the culprit, so replace it. Additionally, the starter relay or the starter motor itself could be faulty, requiring inspection.
  • K
    Karl WhiteAug 23, 2025
    What to do if the malfunction indicator lamp lights up or flashes on my Husqvarna TE 150i 2022?
    • A
      allensharonAug 23, 2025
      If the malfunction indicator lamp is lighting up or flashing on your Husqvarna Motorcycle, the electronic fuel injection system may have a malfunction. You should check the wiring for any damage and the electrical plug-in connectors for corrosion or damage. It is also recommended to use the Husqvarna Motorcycles diagnostics tool to read the fault memory.
  • L
    lgonzalezAug 30, 2025
    What to do if my Husqvarna TE 150i 2022 engine does not speed up?
    • J
      James CraigAug 30, 2025
      If your Husqvarna Motorcycle engine does not speed up, it could be due to a malfunction in the electronic fuel injection, which may require using a Husqvarna Motorcycles diagnostics tool to read the fault memory. Another potential cause is faulty ignition, so you should check the ignition coil, spark plug connector, and the stator winding of the alternator. Finally, the ambient pressure might be incorrectly stored, requiring you to program the ambient air pressure.
  • J
    joshuareyesSep 1, 2025
    Why does my Husqvarna TE 150i 2022 Motorcycle engine die during the trip?
    • D
      Denise WagnerSep 1, 2025
      If your Husqvarna Motorcycle engine dies during a trip, it could be due to a lack of fuel, requiring you to refuel. Another possible cause is the engine taking in false air, so check that the intake flange is firmly seated. Also, the connector or ignition coil could be loose or oxidized; in this case, clean the connector and treat it with contact spray. Finally, incorrectly stored ambient pressure might be the reason, and you would need to program the ambient air pressure.
  • C
    Chad DiazSep 3, 2025
    Why does my Husqvarna TE 150i 2022 engine have no idle speed?
    • M
      Michael HarrisSep 4, 2025
      If your Husqvarna Motorcycle engine has no idle speed, it could be due to a defective spark plug, which would need to be changed. Another potential cause is faulty ignition, so you should check the ignition coil, spark plug connector, and the stator winding of the alternator. Also, the idle speed might not be set correctly, and you would need to adjust it.
  • D
    David WilsonSep 6, 2025
    What does white smoke emission (steam in exhaust gas) mean in my Husqvarna Motorcycle?
    • A
      Arthur WeaverSep 6, 2025
      If you notice white smoke emission (steam in exhaust gas) from your Husqvarna Motorcycle, it could indicate a damaged cylinder head or cylinder head gasket. You should check these components for damage.
  • S
    Suzanne BrownSep 8, 2025
    Why is gear oil exiting at the vent hose of my Husqvarna TE 150i 2022?
    • B
      Bonnie JordanSep 8, 2025
      If gear oil is exiting at the vent hose of your Husqvarna Motorcycle, it likely means that too much gear oil was added. Check the gear oil level to confirm.
  • C
    charlesguerraSep 12, 2025
    Why is there water in the gear oil of my Husqvarna TE 150i 2022?
    • A
      Angela MooreSep 12, 2025
      If you find water in the gear oil of your Husqvarna Motorcycle, it suggests that the radial shaft seal ring or water pump may be damaged. Inspect these components to determine if they need replacement.
  • J
    Jenna NorrisSep 13, 2025
    Why is the 12-V battery discharged on my Husqvarna TE 150i 2022 Motorcycle?
    • H
      Harry BrandtSep 13, 2025
      If the 12-V battery on your Husqvarna Motorcycle is discharged, it could be because the alternator is not charging it. Check the charging voltage and the stator winding of the alternator. It could also be due to an unwanted electrical power consumer, in which case you should check the open-circuit current.
  • B
    Brandon RogersSep 15, 2025
    Why are values in combination instrument deleted (time, stop watch, lap times) on my Husqvarna TE 150i 2022?
    • M
      Michelle BennettSep 15, 2025
      If the values in the combination instrument (time, stop watch, lap times) are deleted on your Husqvarna Motorcycle, it is likely because the combination instrument battery is empty. You should change the combination instrument battery.

Summary

Means of Representation

Symbols Used

Explains the meaning of specific symbols used throughout the manual.

Formats Used

Explains the typographical formats used in the document for clarity.

Safety Advice

Use Definition - Intended Use

Defines the intended operational parameters and restrictions for the vehicle.

Safety Advice

Provides essential safety instructions for operating the motorcycle safely.

Degrees of Risk and Symbols

Explains the different levels of risk and their corresponding symbols.

Important Notes

Manufacturer Warranty, Implied Warranty

Details warranty terms and requirements for authorized service.

Service

Emphasizes the importance of proper service for optimal performance.

View of Vehicle

View of Vehicle, Front Left (Example)

Illustrates and labels key components of the front left view.

View of Vehicle, Rear Right (Example)

Illustrates and labels key components of the rear right view.

Serial Numbers

Vehicle Identification Number

Explains where to locate the unique vehicle identification number.

Engine Number

Details the location for identifying the engine's serial number.

Shock Absorber Article Number

Indicates where to find the article number for the shock absorber.

Controls

Clutch Lever

Describes the clutch lever and its hydraulic operation.

Stop Button

Explains the operation and states of the engine stop button.

Map Switch

Details the function of the map switch for engine characteristics.

Combination Instrument

Overview

Provides an overview of the combination instrument components and functions.

Adjusting the Combination Instrument

Details how to adjust settings like units, clock, and service display.

Speed, Time, and DST Distance

Instructions for viewing and resetting speed, time, and distance measurements.

Preparing for Use

Advice on Preparing for First Use

General advice and safety precautions before the initial ride.

Preparing the Vehicle for Difficult Operating Conditions

Advice for riding in challenging conditions like sand or mud.

Riding Instructions

Checks and Maintenance Measures When Preparing for Use

Lists essential pre-ride checks and maintenance tasks.

Starting the Vehicle

Instructions on how to start the motorcycle safely and correctly.

Braking

Provides advice and warnings related to braking system operation.

Service Schedule

Required Work

Lists mandatory maintenance tasks at specific operating hour intervals.

Recommended Work

Lists recommended maintenance tasks for optimal upkeep.

Tuning the Chassis

Checking the Basic Chassis Setting with Riders Weight

How to adjust chassis settings based on rider's weight.

Adjusting the Compression Damping of the Shock Absorber

Procedure to adjust low-speed and high-speed compression damping.

Checking the Riding Sag of the Shock Absorber

Steps to measure and check the riding sag of the rear suspension.

Service Work on the Chassis

Raising the Motorcycle with a Lift Stand

Instructions for safely lifting the motorcycle using a stand.

Removing the Fork Legs

Detailed steps for removing the front fork legs.

Removing the Shock Absorber

Steps required to safely remove the rear shock absorber.

Brake System

Checking the Front Brake Fluid Level

How to check the front brake fluid level and identify issues.

Checking the Brake Discs

Procedure to inspect brake discs for wear and damage.

Changing the Rear Brake Linings

Procedure for replacing the rear brake linings.

Wheels, Tires

Removing the Front Wheel

Steps required to safely remove the front wheel assembly.

Checking the Tire Condition

How to check tire tread depth, condition, and age.

Checking Spoke Tension

Procedure to check and adjust spoke tension for wheel integrity.

Electrical System

Removing the 12-V Battery

Steps for safely removing the 12-volt battery.

Charging the 12-V Battery

Instructions for properly charging the 12-volt battery.

Changing Main Fuse

Procedure for replacing the main electrical system fuse.

Cooling System

Checking the Antifreeze and Coolant Level

How to check the coolant and antifreeze levels in the system.

Draining the Coolant

Procedure for safely draining the coolant from the system.

Tuning the Engine

Checking the Play in the Throttle Cable

How to check and measure the free play in the throttle cable.

Adjusting the Idle Speed

Procedure for adjusting the engine's idle speed.

Service Work on the Engine

Changing the Fuel Screen

Procedure for replacing the fuel filter screen.

Checking 2-Stroke Oil Level

How to check the level of 2-stroke oil in the reservoir.

Changing the Gear Oil

Procedure for draining and refilling the engine's gear oil.

Cleaning, Care

Cleaning the Motorcycle

Instructions for safely cleaning the motorcycle.

Checks and Maintenance Steps for Winter Operation

Maintenance and checks for preparing the vehicle for winter use.

Storage

Storage

Steps for storing the motorcycle for extended periods.

Preparing for Use After Storage

Steps to take before using the motorcycle after storage.

Troubleshooting

Faults: The Engine Cannot Be Cranked (Starter Motor)

Possible causes and actions for engine not cranking.

Faults: Engine Overheats

Possible causes and actions for engine overheating.

Blink Code

Blink Code for Malfunction Indicator Lamp 45

Malfunction code 45 and its associated error conditions.

Blink Code for Malfunction Indicator Lamp 12

Malfunction code 12 and its associated error conditions.

Technical Data

Engine

Technical specifications and dimensions for the engine.

Chassis Tightening Torques

Torque specifications for various chassis fasteners.

Substances

Brake Fluid DOT 4; DOT 5.1

Specifications and recommended suppliers for brake fluid.

Coolant

Specifications and recommended suppliers for coolant.

Auxiliary Substances

Air Filter Cleaner

Recommended cleaning agent for air filters.

Motorcycle Cleaner

Recommended cleaning product for the motorcycle exterior.

Standards

JASO T903 MA2

Explanation of the JASO T903 MA2 standard for motorcycle oils.

Index of Special Terms

OBD

Definition of On-board diagnosis system.

List of Abbreviations

Art. no.

Abbreviation for Article number.

List of Symbols

29.1 Red Symbols

Indicates error conditions requiring immediate intervention.

29.2 Yellow and Orange Symbols

Indicates error conditions requiring prompt intervention.

Husqvarna TE 150i 2022 Specifications

General IconGeneral
Transmission6-speed
Bore x Stroke58 x 54.5 mm
Front BrakeDisc brake
Rear BrakeDisc brake
StarterElectric Starter
Front Tire90/90-21
Engine TypeSingle-cylinder, 2-stroke
Fuel Tank Capacity8.5 L
Cooling SystemLiquid-cooled
Front SuspensionWP Xplor 48
Rear SuspensionWP Xplor shock absorber

Related product manuals