Need help?Do you have a question about the Husqvarna TE 250R 2013 and is the answer not in the manual?
General| Engine Stroke | 2-Stroke |
|---|---|
| Transmission | 6-speed |
| Front Brake | 260 mm disc |
| Rear Brake | 220 mm disc |
| Final Drive | Chain |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Cooling | Liquid |
| Engine Type | Single cylinder |
| Displacement | 249 cc |
| Ignition | Digital |
| Rear Suspension | WP Monoshock |
| Seat Height | 970 mm (38.2 inches) |
| Fuel Tank Capacity | 8.5 L |
| Starter | Kick |
| Bore x Stroke | 66.4 mm x 72 mm |
Welcome to the Husqvarna family; manual provides operation and care instructions.
Details warranty conditions for TXC competition and TE street legal models.
States guarantee reference is based on motorcycle configuration.
Covers precautions for children and critical safety warnings.
Explains where to find the engine and frame numbers for identification.
Identifies controls on the TE model and explains key usage.
Identifies various controls on the TXC model.
Details engine, fuel system, clutch, transmission, and timing system data.
Provides data on frame, front/rear suspension, brakes, and rims.
Details tire sizes and cold tire pressure recommendations.
Specifies overall dimensions, weight, fuel tank, and coolant capacity.
Instructions for using the ON-OFF and screw-type fuel cocks.
Proper operation and safety precautions for the side stand.
Specifies fuel type and provides safety warnings for refueling.
Step-by-step guide for starting the engine when cold.
Describes the digital instrument panel and its warning lights.
Explains Speed/Clock, Trip, Chrono, and Hour Counter functions.
Explanation of the Fuel Injection (FI) warning light for TE models.
Explanation of the warning lights panel for TXC models.
Adjusting throttle and front brake lever positions.
Adjusting clutch lever position and operating steering lock.
Details on lights, horn, turn signals, and engine stop button.
Location of the engine start button on the right handlebar.
Information on operating the rear brake pedal.
Instructions for using the gear shift lever.
Essential pre-ride inspections for safety and performance.
Guidance on breaking in the engine for longevity.
Checks to perform periodically while riding.
Detailed procedure for starting a cold engine.
Specific advice for starting at low external temperatures.
Steps to slow down the motorcycle and shift to neutral.
Using the engine stop button to halt the engine.
Procedure for checking the engine oil level.
Steps for engine oil and filter replacement.
How to check the coolant level and safety warnings.
Detailed procedure for replacing the cooling fluid.
How to check and adjust throttle cable free play.
Procedure for adjusting the engine's idle speed.
Checking spark plug condition, gap, and replacement.
Instructions for checking the air filter on TXC models.
Steps for cleaning and reinstalling the TXC air filter.
Instructions for checking the air filter on TE models.
Steps for cleaning and reinstalling the TE air filter.
Procedure to adjust steering for proper play.
How to adjust the steering lock mechanism.
Adjusting lever play and checking front brake fluid level.
Adjusting the rear brake pedal position.
Setting the correct idle stroke for the rear brake pedal.
Checking the fluid level in the clutch master cylinder reservoir.
Adjusting the clutch lever position for rider comfort.
Suspension setup recommendations for hard surfaces.
Suspension setup recommendations for sandy terrain.
Suspension setup recommendations for muddy conditions.
Procedure for adjusting fork compression damping.
Procedure for adjusting fork extension damping.
How to bleed air from the fork.
Procedure for checking the oil level in fork legs.
Specifications for the oil volume in each fork leg.
Measuring and setting rear suspension sag.
Adjusting the spring preload for rider weight.
Adjusting the compression damping on the shock absorber.
Adjusting the extension damping on the shock absorber.
Procedure for checking and adjusting chain tension.
Quick method for adjusting chain tension.
Instructions for lubricating the chain correctly.
Steps for disassembling and cleaning the drive chain.
Specific method for washing and lubricating O-ring chains.
Inspection of chain tensioners, guides, and runners.
Detailed procedure for removing the front wheel.
Detailed procedure for reassembling the front wheel.
Detailed procedure for removing the rear wheel.
Importance of maintaining correct tire inflation pressure.
Overview of the main components of the brake system.
Steps for removing and installing brake pads.
Checking wear limits and cleaning recommendations for pads.
Measuring disc thickness and checking against service limits.
Procedure for cleaning brake discs using solvent.
Role of the muffler in performance and condition.
Care, storage, and charging procedures for the battery.
Checking battery voltage and charge level before installation.
Critical warnings regarding sulfuric acid and explosive gases.
Instructions for accessing and replacing headlamp bulbs.
Information regarding the replacement of the LED tail light.
Procedure for replacing the number plate bulb.
How to adjust the headlight beam for proper aim.
Essential checks to perform after racing.
Steps for washing the motorcycle safely.
Key precautions for cleaning, especially electrical parts.
Comprehensive checklist for pre-delivery inspection.
To Next Page