Husqvarna Viking 3600 User Manual

L
Needle and thread
Mercerized cotton
thread as well as synthetic thread is
used
for every
kind of fabric.
No. 30—50 embroidery or darning
thread
gives
among
other
things fine buttonholes and nice
top stitching. As
the name
implies,
it
is
of course also used for embroidery and darning.
You will find a picture of
a
needle
on the inside of the shuttle
door. The needle system has number 705
H. Use
only needles
marked
in this way. The
machine is fitted with needle No.
80.
You will also find
a number of extra needles of various sizes
in the accessory box.
With regard to the size of needle,
it may be
generally
said that
No. 80—90 can
be used for most fabrics. For
a
finer
thread and
for sheer and tightly
woven fabrics a finer needle should
be
used.
For very heavy and
stiff fabrics a coarse needle must be used.
The
higher
the
number,
the coarser the needle. The sizes of
thread and needle
to be used are shown on the table.
Changing
the needle
Loosen the needle
clamp screw and remove
the needle which
is to be changed.
When you insert the
new needle, turn the
flat side away from
you and push the needle
up into the
needle socket
as
far
as the stop.
Tighten the screw so
that the
needle is held firmly.
Sewing Coloured Embroidery
thread sewing Silk Synthetic thread or Needle
English thread thread thread Darning No.
No.
No.
thread
60
60 70
50-60 26
100/3
1)
40—50
80
40—50 26
100/3
30—50 90
40
20 100
30
110
30 120
‘)
Synthetic threads are not generally numbered.
I
I
6

Husqvarna Viking 3600 Specifications

General

Brand	Husqvarna
Model	Viking 3600
Category	Sewing Machine
Language	English