Husqvarna Vitpilen 401 EU 2022 User Manual (English)

Questions and Answers:

S
Scott QuinnAug 20, 2025
Why is my Husqvarna Vitpilen 401 EU 2022 Motorcycle engine overheating?
- K
  Katie BrownAug 20, 2025
  If your Husqvarna Motorcycle engine overheats, several factors could be the cause. There might be too little coolant in the cooling system, so check for leaks and verify the coolant level. The radiator fins could be very dirty, so clean them. Foam formation in the cooling system can also cause overheating, so drain the coolant and then fill and bleed the system. A defective thermostat or a blown fuse 5 can also lead to overheating, so check the thermostat and replace the fuse if necessary. Finally, a defect in the radiator fan system may be the cause, so inspect the radiator fan system.
V
Vincent KaneAug 21, 2025
Why does my Husqvarna Motorcycle engine have too little power?
- K
  Katie DayAug 21, 2025
  If your Husqvarna Motorcycle engine has too little power, the air filter might be very dirty, so change it. The fuel filter could also be very dirty, so check the fuel pressure. Another cause could be a malfunction in the electronic fuel injection, so you should read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
R
robertshawAug 25, 2025
Why does my Husqvarna Motorcycle have high oil consumption?
- C
  Charles PriceAug 25, 2025
  If your Husqvarna Motorcycle has high oil consumption, the engine vent hose might be bent, so route it without bends or change it if necessary. The engine oil level could also be too high, so check it. Additionally, the engine oil might be too thin, so change the engine oil and the oil filter, and clean the oil screens.
B
Betty HarveyAug 26, 2025
What to do if Husqvarna Motorcycle engine does not turn when the start button is pressed?
- T
  Terri AustinAug 26, 2025
  If the Husqvarna Motorcycle engine doesn't turn when you press the start button, several things could be the cause. You may not be following the correct start procedure, so ensure you are starting it properly. The 12-V battery might be discharged, so you should charge it. Also, check if the main fuse or fuse 3, 4, or 7 is blown and replace it if needed. Finally, verify that there is a proper ground connection.
P
Paul ArnoldAug 28, 2025
What to do if my Husqvarna Vitpilen 401 EU 2022 Motorcycle engine dies during the trip?
- N
  nortonsandraAug 28, 2025
  If your Husqvarna Motorcycle engine dies during a trip, it could be due to a lack of fuel, so refuel. Another possibility is that the main fuse or fuse 3, 4, or 7 is blown, so replace the fuse.
E
Emily WalkerAug 29, 2025
Why is my Husqvarna Vitpilen 401 EU 2022 Motorcycle 12 V battery discharged?
- E
  elizabeth58Aug 29, 2025
  If the 12 V battery of your Husqvarna Motorcycle is discharged, it might be because the ignition was not switched off when the vehicle was parked, so charge the 12-V battery. Another reason could be that the 12-V battery is not being charged by the alternator, so check the charging voltage and the open-circuit current.
V
Vincent AndrewsSep 1, 2025
What does it mean when the ABS warning lamp lights up on my Husqvarna Vitpilen 401 EU 2022?
- C
  Christina CooperSep 1, 2025
  If the ABS warning lamp lights up on your Husqvarna Motorcycle, the ABS fuse might be blown, so replace the ABS fuses. A large difference in wheel speeds between the front and rear wheels could also trigger the lamp, so stop the vehicle, switch off the ignition, and start it again. Finally, a malfunction in the ABS could be the cause, so use the Husqvarna Motorcycles diagnostics tool to read out the fault memory.
K
Kayla PopeSep 3, 2025
What to do if Husqvarna Vitpilen 401 EU 2022 Motorcycle engine turns but does not start?
- J
  johnleeSep 3, 2025
  If the engine of your Husqvarna Motorcycle turns but does not start, it could be due to an operating error, so carry out the start procedure. Another potential cause is a malfunction in the electronic fuel injection, requiring you to read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
J
Julie WellsSep 4, 2025
What does it mean if the malfunction indicator lamp lights up yellow on my Husqvarna Vitpilen 401 EU 2022 Motorcycle?
- K
  kevin40Sep 4, 2025
  If the malfunction indicator lamp lights up yellow on your Husqvarna Motorcycle, it indicates a potential malfunction in the electronic fuel injection system. To diagnose this, read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
C
Charles ReynoldsSep 7, 2025
Why does my Husqvarna Vitpilen 401 EU 2022 Motorcycle engine turn only if the clutch lever is drawn?
- C
  Corey SanchezSep 7, 2025
  The Husqvarna Motorcycle engine might only turn if the clutch lever is drawn because the vehicle is in gear. Shift the transmission into neutral. Also, if the vehicle is in gear and the side stand is folded out, shift the transmission into neutral.

Husqvarna Vitpilen 401 EU 2022 Specifications

General

Brand	Husqvarna
Model	Vitpilen 401 EU 2022
Category	Motorcycle
Language	English

Summary

Means of Representation

Symbols Used

Explains the meaning of various symbols used in the manual for clarity.

Formats Used

Details the typographical formats used for consistency and understanding.

Safety Advice

Safety Advice and Usage Guidelines

Covers intended use, misuse, and general safety advice for operation.

Degrees of Risk and Symbols

Explains danger levels and associated symbols for hazard warnings.

Tampering Warning

Warns against unauthorized modifications to noise control systems.

Safe Operation

Provides critical guidance for safe riding and operation.

Protective Clothing and Work Rules

Emphasizes wearing protective gear and outlines rules for vehicle maintenance.

Environment and Owner's Manual

Advises on environmental responsibility and the importance of the manual.

Important Notes

Warranty, Spare Parts, and Service

Covers manufacturer warranty, spare parts, accessories, and service requirements.

Fuel, Substances, and Customer Support

Guidance on fuel, auxiliary substances, figures, and customer service.

View of Vehicle

View of Vehicle, Front Left

Illustrates and labels key components from the front left view.

View of Vehicle, Rear Right

Illustrates and labels key components from the rear right view.

Serial Numbers

Vehicle Identification Numbers

Covers VIN, type label, and engine number locations for identification.

Key Number Information

Explains where to find the key number for replacement purposes.

Fork and Shock Absorber Article Numbers

Indicates where fork and shock absorber article numbers are stamped.

Controls

Clutch, Hand Brake, and Throttle Controls

Operation of clutch, hand brake levers, and throttle grip.

Left Handlebar Switches

Details switches for high beam, light, turn signals, and horn.

Right Handlebar Switches and Locks

Covers emergency OFF, start button, ignition, and steering lock.

Vehicle Access and Operation

Covers seat lock, tool set, grab handle, foot pegs, brake levers, side stand.

Combination Instrument

Instrument Cluster Overview

Provides an overview of the instrument cluster and its components.

Activation and Self-Test

Describes how the instrument cluster activates and performs its self-test.

Warning Indicators and Messages

Details various warning messages and indicator lamps for operational status.

Display Information and Navigation

Explains display readouts, fuel level, coolant temp, and function buttons.

Trip Meters and Settings

Covers TRIP 1, TRIP 2 displays, fuel range, service, and unit settings.

ABS and Shift Speed Adjustments

Describes how to adjust ABS modes and shift speed RPM settings.

Preparing for Use

First Use Preparation and Engine Break-in

Provides essential pre-ride checks, safety advice, and engine break-in procedures.

Vehicle Loading Guidelines

Gives warnings and guidelines for safely loading luggage onto the vehicle.

Riding Instructions

Pre-Ride Checks and Starting Procedure

Lists crucial pre-ride checks and details the engine starting procedure.

Starting Off and Shifting

Explains how to move from a standstill and general shifting techniques.

Easy Shift and Riding Techniques

Describes the quick-shifting system and provides riding advice.

Braking and Stopping Procedures

Explains how to use the braking system effectively and safely stop/park.

Transport and Breakdown Towing

Gives guidelines for securely transporting and towing the motorcycle.

Refueling Safety

Provides essential safety instructions for refueling the vehicle.

Service Schedule

Additional Information and Required Work

Provides context on service intervals and lists mandatory service tasks.

Recommended Work

Lists recommended additional service tasks for optimal vehicle upkeep.

Tuning the Chassis

Chassis Tuning Options

Introduces chassis tuning for suspension adjustment based on style and load.

Adjusting Fork Damping

Details how to adjust the fork's compression and rebound damping.

Adjusting Shock Absorber Damping and Preload

Guides on adjusting the shock absorber's rebound damping and spring preload.

Service Work on the Chassis

Lifting and Securing the Motorcycle

Provides instructions for safely lifting and lowering the motorcycle using gears.

Component Removal and Installation

Covers removal/installation of seat, side covers, and license plate bracket.

Front Spoiler and Chain Maintenance

Details front spoiler work, chain inspection, and cleaning procedures.

Chain Tension Adjustment and Inspection

Covers checking chain tension, sprockets, and adjusting chain tension.

Brake System

Anti-lock Braking System (ABS)

Explains the ABS system's function, components, and operation.

Brake Lever and Disc Adjustments

Covers adjusting hand brake lever and checking brake discs.

Brake Fluid and Linings Checks

Guides on checking front/rear brake fluid levels and linings.

Foot Brake Lever Checks and Adjustments

Details checking and adjusting the free travel of the foot brake lever.

Wheels, Tires

Front Wheel Removal and Installation

Step-by-step guide for removing and reinstalling the front wheel.

Rear Wheel Removal and Installation

Step-by-step guide for removing and reinstalling the rear wheel.

Tire Condition and Pressure Checks

Guides on inspecting tires for wear, damage, and checking tire pressure.

Spoke Tension and Tire Repair

Covers checking spoke tension and using tire repair spray.

Electrical System

12-V Battery Maintenance

Covers battery removal, installation, and charging procedures.

Fuse Replacement Procedures

Guides on changing main, ABS, and individual electrical power fuses.

Headlight Settings and Diagnostics

Covers checking/adjusting headlight settings and locating the diagnostics connector.

Accessory Power and Component Locations

Shows accessory power supply locations and diagnostics connector.

Cooling System

Cooling System Overview

Provides an overview of the cooling system's function and components.

Coolant Level and Antifreeze Checks

Guides on checking coolant and antifreeze levels in the system.

Coolant Draining and Filling

Details procedures for draining, filling, and bleeding the cooling system.

Coolant Changing Procedure

Provides step-by-step instructions for changing the engine coolant.

Tuning the Engine

Clutch Lever Play Adjustment

Explains how to check and adjust the clutch lever's free travel.

Shift Lever Position Adjustment

Details checking and adjusting the basic position of the shift lever.

Service Work on the Engine

Engine Oil Level Check

Guides on how to correctly check the engine oil level.

Engine Oil and Filter Change

Details the process for changing engine oil, filter, and cleaning oil screens.

Adding Engine Oil

Provides instructions for adding engine oil to the correct level.

Cleaning, Care

Cleaning the Motorcycle

Offers guidance on safely and effectively cleaning the motorcycle.

Winter Operation Maintenance

Outlines precautions and maintenance for winter operation or storage.

Storage

Long-Term Storage Procedures

Provides steps for preparing the motorcycle for long-term storage.

Preparing for Use After Storage

Details the procedure for getting the motorcycle ready after storage.

Troubleshooting

Faults, Possible Causes, and Actions

Lists common faults, their potential causes, and recommended actions.

Technical Data

Engine Specifications

Lists detailed specifications for engine components and performance.

Engine Tightening Torques

Provides torque specifications for various engine fasteners.

Capacities and Chassis Specifications

Lists capacities for fluids and details chassis component specifications.

Electrical System and Tires

Lists specifications for the electrical system, battery, fuses, and tires.

Fork, Shock Absorber, and Torque Data

Provides specifications for fork/shock adjustment and chassis torque values.

Substances

Brake Fluid and Coolant Specifications

Specifies brake fluid types and coolant requirements, including antifreeze protection.

Engine Oil Specifications

Specifies engine oil standards, grades, and recommended suppliers.

Auxiliary Substances

Lubricants and Cleaners

Covers chain cleaner, fuel additive, grease, motorcycle cleaner, and oil sprays.

Surface and Paint Care Products

Lists products for paint finish, material preservation, and special surface cleaning.

Standards

JASO T903 MA2 Standard

Explains the JASO T903 MA2 standard for motorcycle oils.

SAE Viscosity Classification

Explains the SAE viscosity classification for oils.

Index of Special Terms

Glossary of Terms

Defines key terms like ABS, Easy Shift, and OBD.

List of Abbreviations

Common Abbreviations

Lists common abbreviations used in the manual and their meanings.

List of Symbols

Warning Symbols (Yellow/Orange)

Explains the meaning of warning symbols indicating error conditions.

Informational Symbols (Green/Blue)

Explains the meaning of informational symbols indicating status.

Related product manuals

Husqvarna Vitpilen 401 2018

263 pages

Husqvarna VITPILEN 401 2020

273 pages

Husqvarna SVARTPILEN 401

Husqvarna 701 Enduro 2017

216 pages

Husqvarna Supermoto 701 2021

278 pages

Husqvarna Vitpilen 401 EU 2022 User Manual

Table of Contents