Why are the headlight and position light not functioning on my Husqvarna Vitpilen 401 EU 2022?
If the headlight and position light are not functioning on your Husqvarna Motorcycle, fuse 6 might be blown, so replace the fuses of individual electrical power consumers.
Why are the turn signal, brake light, and horn not functional on my Husqvarna Vitpilen 401 EU 2022 Motorcycle?
If the turn signal, brake light, and horn are not functional on your Husqvarna Motorcycle, fuse 4 or 6 might be blown, so change the fuses of individual electrical power consumers.
Why does the combination instrument show nothing on the display of my Husqvarna Vitpilen 401 EU 2022 Motorcycle?
If the combination instrument shows nothing on the display of your Husqvarna Motorcycle, fuse 2 or 7 might be blown, so change the fuses of individual electrical power consumers.
General| Brand | Husqvarna |
|---|---|
| Model | Vitpilen 401 EU 2022 |
| Category | Motorcycle |
| Language | English |
Explains the meaning of various symbols used in the manual for clarity.
Details the typographical formats used for consistency and understanding.
Covers intended use, misuse, and general safety advice for operation.
Explains danger levels and associated symbols for hazard warnings.
Warns against unauthorized modifications to noise control systems.
Provides critical guidance for safe riding and operation.
Emphasizes wearing protective gear and outlines rules for vehicle maintenance.
Advises on environmental responsibility and the importance of the manual.
Covers manufacturer warranty, spare parts, accessories, and service requirements.
Guidance on fuel, auxiliary substances, figures, and customer service.
Illustrates and labels key components from the front left view.
Illustrates and labels key components from the rear right view.
Covers VIN, type label, and engine number locations for identification.
Explains where to find the key number for replacement purposes.
Indicates where fork and shock absorber article numbers are stamped.
Operation of clutch, hand brake levers, and throttle grip.
Details switches for high beam, light, turn signals, and horn.
Covers emergency OFF, start button, ignition, and steering lock.
Covers seat lock, tool set, grab handle, foot pegs, brake levers, side stand.
Provides an overview of the instrument cluster and its components.
Describes how the instrument cluster activates and performs its self-test.
Details various warning messages and indicator lamps for operational status.
Explains display readouts, fuel level, coolant temp, and function buttons.
Covers TRIP 1, TRIP 2 displays, fuel range, service, and unit settings.
Describes how to adjust ABS modes and shift speed RPM settings.
Provides essential pre-ride checks, safety advice, and engine break-in procedures.
Gives warnings and guidelines for safely loading luggage onto the vehicle.
Lists crucial pre-ride checks and details the engine starting procedure.
Explains how to move from a standstill and general shifting techniques.
Describes the quick-shifting system and provides riding advice.
Explains how to use the braking system effectively and safely stop/park.
Gives guidelines for securely transporting and towing the motorcycle.
Provides essential safety instructions for refueling the vehicle.
Provides context on service intervals and lists mandatory service tasks.
Lists recommended additional service tasks for optimal vehicle upkeep.
Introduces chassis tuning for suspension adjustment based on style and load.
Details how to adjust the fork's compression and rebound damping.
Guides on adjusting the shock absorber's rebound damping and spring preload.
Provides instructions for safely lifting and lowering the motorcycle using gears.
Covers removal/installation of seat, side covers, and license plate bracket.
Details front spoiler work, chain inspection, and cleaning procedures.
Covers checking chain tension, sprockets, and adjusting chain tension.
Explains the ABS system's function, components, and operation.
Covers adjusting hand brake lever and checking brake discs.
Guides on checking front/rear brake fluid levels and linings.
Details checking and adjusting the free travel of the foot brake lever.
Step-by-step guide for removing and reinstalling the front wheel.
Step-by-step guide for removing and reinstalling the rear wheel.
Guides on inspecting tires for wear, damage, and checking tire pressure.
Covers checking spoke tension and using tire repair spray.
Covers battery removal, installation, and charging procedures.
Guides on changing main, ABS, and individual electrical power fuses.
Covers checking/adjusting headlight settings and locating the diagnostics connector.
Shows accessory power supply locations and diagnostics connector.
Provides an overview of the cooling system's function and components.
Guides on checking coolant and antifreeze levels in the system.
Details procedures for draining, filling, and bleeding the cooling system.
Provides step-by-step instructions for changing the engine coolant.
Explains how to check and adjust the clutch lever's free travel.
Details checking and adjusting the basic position of the shift lever.
Guides on how to correctly check the engine oil level.
Details the process for changing engine oil, filter, and cleaning oil screens.
Provides instructions for adding engine oil to the correct level.
Offers guidance on safely and effectively cleaning the motorcycle.
Outlines precautions and maintenance for winter operation or storage.
Provides steps for preparing the motorcycle for long-term storage.
Details the procedure for getting the motorcycle ready after storage.
Lists common faults, their potential causes, and recommended actions.
Lists detailed specifications for engine components and performance.
Provides torque specifications for various engine fasteners.
Lists capacities for fluids and details chassis component specifications.
Lists specifications for the electrical system, battery, fuses, and tires.
Provides specifications for fork/shock adjustment and chassis torque values.
Specifies brake fluid types and coolant requirements, including antifreeze protection.
Specifies engine oil standards, grades, and recommended suppliers.
Covers chain cleaner, fuel additive, grease, motorcycle cleaner, and oil sprays.
Lists products for paint finish, material preservation, and special surface cleaning.
Explains the JASO T903 MA2 standard for motorcycle oils.
Explains the SAE viscosity classification for oils.
Defines key terms like ABS, Easy Shift, and OBD.
Lists common abbreviations used in the manual and their meanings.
Explains the meaning of warning symbols indicating error conditions.
Explains the meaning of informational symbols indicating status.
To Next Page