English – 45
TECHNICAL DATA
Technical data
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this
value. Actual power output for the engine installed on the final machine will depend on the operating speed,
environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard
deviation) of 0.2 m/s
2
.
WC 48 Se
Engine
Engine manufacturer Briggs & Stratton
Cylinder displacement, cm
3
190
Speed, rpm 2900
Nominal engine output, kW (see note 1) 3,1
Ignition system
Spark plug Champion RC12YC
Electrode gap, mm 0,5
Fuel and lubrication system
Fuel tank capacity, litre 1,1
Oil tank capacity, litre 0,6
Engine oil SAE 30/SAE 10W-30
Weight
Machine with empty tanks, kg 44
Noise emissions (see note 2)
Sound power level, measured dB (A) 95
Sound power level, guaranteed L
WA
dB (A) 96
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A) 83
Vibration levels, a
hveq
(see note 4)
Handle, m/s
2
2,5
Cutting system
Cutting height, mm 25-55
Cutting width, cm 48
Cutter Fixed
Bagger capacity, litre
65
To Next Page
Loading...
