EasyManua.ls Logo

Hussmann microSC MDN4775B1A - Installation; UL Listing; Federal; State Regulation; Hussmann Product Control

Hussmann microSC MDN4775B1A
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P/N 9FQ6P11007900_B 1-1
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Open Vertical Merchandisers
UL LISTING
These merchandisers are manufactured to meet
ANSI/ UL 471 standard requirements for safety.
Proper installation is required to maintain the
listing.
FEDERAL / STATE REGULATION
These merchandisers at the time they are
manufactured, meet all federal and state/
provincial regulations. Proper installation
is required to ensure these standards are
maintained. Near the serial plate, each
merchandiser carries a label identifying the
environment for which the merchandiser was
designed for use. This model is Type II as
described below.
NSF/ANSI 7 Type II – Display Refrigerator / Freezer
Intended for 80°F / 55%RH Ambient Application
NSF/ANSI 7 – Display Refrigerator
Intended for Bulk Produce
HUSSMANN PRODUCT CONTROL
The serial number and shipping date of all
equipment is recorded in Hussmann’s files for
warranty and replacement part purposes. All
correspondence pertaining to warranty or parts
ordering must include the serial number of each
piece of equipment involved. This is to ensure
the customer is provided with the correct parts.
SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during
unloading. This equipment has been carefully
inspected at our factory.
Any claim for loss or damage must be made
to the carrier. The carrier will provide any
necessary inspection reports and/or claim forms.
Apparent Loss or Damage
If there is an obvious loss or damage, it must be
noted on the freight bill or express receipt and
signed by the carrier’s agent; otherwise, carrier
may refuse claim.
Concealed Loss or Damage
When loss or damage is not apparent until
after equipment is uncrated, retain all packing
materials and submit a written response to the
carrier for inspection within 15 days.
LOCATION
These merchandisers are designed for displaying
products in air conditioned stores where
temperature is maintained at or below the
NSF/ANSI 7 specified level and relative humidity
is maintained at or below 55%.
Placing refrigerated merchandisers in direct
sunlight, near hot tables or near other heat
sources could impair their efficiency. Like other
merchandisers, these merchandisers are sensitive
to air disturbances. Air currents passing around
merchandisers will seriously impair their
operation. Do NOT allow air conditioning,
electric fans, open doors or windows, etc. to
create air currents around the merchandiser.
INSTALLATION
Recommended operating ambient
temperature is between 60°F (16°C)
to 80°F (27°C). Maximum relative
humidity is 55%.
Do NOT stand or walk on top of
merchandiser. Do not store items or
ammable materials atop the unit.

Related product manuals