125816 8-1 REV B
MAINTENANCE
Maintenance Schedule
Figure 8-1, Figure 8-2, Figure 8-3, Figure 8-4, Figure 8-5,
Figure 8-6, Figure 8-7, and Figure 8-8
SERVICE AT
INTERVALS INDICATED
WEEKLY
OR 50
HOURS
MONTHLY
OR 100
HOURS
* ANNUALLY
OR 500
HOURS
Verify safety start interlock system Prior to each use
Visually inspect unit for loose hardware and/or damaged parts Prior to each use
Visually inspect tires Prior to each use
Check oil level, engine (1) Prior to each use or every 4 hours
Clean oil heat exchanger (8) Prior to each use or every 4 hours
Clean air intake screen (8) Prior to each use or every 4 hours
Check fuel level Prior to each use
Blades - sharpen and securely fastened Prior to each use
Rubber discharge guards - in good condition and securely in place Prior to each use
Caster fork tapered bearings (11) Regular maintenance not required
Clean engine and pump compartment Daily
Check air cleaner service indicator (8) Daily
Replace air cleaner element (5) As needed
Change engine oil and filter (1) (4) X
Clean cylinder and head fins (10) X
Check battery connections X
Check tire pressure with a gauge X
Check hydraulic oil level X
Clean engine exterior (10) X
Grease deck pusher arms (8) X
Grease side deck pivots X
Grease pump idler (8) X
Grease deck height pivots (8) X
Grease front wheel bearings (8) X
Grease gauge wheel bearings (8) X
Clean and re-gap spark plugs (10) X
Check pump and deck belt tension and condition (6) X
Check fuel system (7) X
Check hydraulic lines X
Check fuel valve (7) X
Check fuel tank grommet (7) X
Tighten lug nuts on wheels (2) X
Change fuel filter (7) X
Clean or replace hydraulic fill cap X
Change hydraulic filter and oil (3) X
Grease deck spindle housings X
Replace spark plugs X
Check ROPS mounting hardware (9) X
Replace fuel evaporation system filter (8) X
To Next Page
Loading...
Need help?
General
