• Password – Password for SMTP server authentication. If the Authentication field is not
checked, the content of this field is irrelevant.
• Importance – Sets the priority of the email message. Important for filtering and further
processing alarm messages.
• From – Sender’s email address, i.e. of the device. The address may be required by the
SMTP servers and can be used to identify the device or to filter and further process alarm
messages.
• Subject of email – The field content can be used to identify the device or for filtering
and further processing of alarm messages.
Email Test Log section
In this section, the SMTP server settings can be tested. Click Test Email to send a test email to
the specified Email address. The Debug log window shows the communication with the SMTP
server.
To Next Page
Loading...