SMS tab
This functionality requires HWg-SMS device with active SIM card registered in the network.
Remote SMS gateway
• Enable – Turns on the SMS sending function.
For sending alert, the SMS alarm action must be configured at the sensor or DI settings.
• SMS Gateway Address – IP address where “HWg-SMS-GW” device is located. It can be
set including service - typically /service.xml (for example
“http://192.168.15.1/service.xml”)
• Port – The TCP port on which the gateway listens.
• Username – User name for authorization in SMS GW.
• Password – Password for authorization in SMS GW.
• SMS + Ring When Alarm – Enables sending an SMS and then dialing the number.
To Next Page
Loading...