Time tab
SNTP Settings section
• SNTP Server - IP address or domain address of the time synchronization server;
europe.pool.ntp.org.
• Time Zone - Set the time zone of the device location. Used to set the correct system
time. Necessary for correct recording of measured values.
• Summertime - Enable daylight saving time. Used to set the correct system time.
Required for correct recording of measured values.
• Interval - Interval of time synchronization with the server.
Time Settings section
Allows you to fill in the current date and time manually when synchronization with the time
server cannot be used.
To Next Page
Loading...