Need help?Do you have a question about the Hyco PF30S and is the answer not in the manual?
General| Model | PF30S |
|---|---|
| Brand | Hyco |
| Category | Water Heater |
| Type | Storage |
| Capacity | 30 Litres |
| Voltage | 230-240V |
| Thermostat | Adjustable thermostat |
| Safety Features | Thermal cut-out, pressure relief valve |
| Tank Material | Enamel-lined steel |
| Insulation | Polyurethane foam |
| Installation Type | Wall-mounted |
| Warranty | 2 years |
| Water Connection | 1/2" BSP |
| Approvals | CE certified |
Planning installation space and securing the heater to the wall.
Details and diagrams for making water connections to the unit.
Requirements for safe termination of discharge pipes per G3 regulations.
Information on wiring and electrical setup compliance.
Procedure for isolating power and draining the water heater.
Steps to access and reset the unit's thermal cut-out.
Instructions for safely removing the heating element.
Recommended steps for inspecting and de-scaling the tank and element.
Guidance on inspecting the sacrificial anode and checking the tank for rust.
Procedure for periodically testing the pressure and temperature relief valves.
Steps for maintaining the pressure reducing valve, including cleaning.
Advice on checking and maintaining the expansion vessel's pre-charge pressure.
Recommendations for preventing Legionella risk, including temperature settings.
Information on contacting the service department for product issues.
To Next Page
