Hyd-Mech H22A-120 User Manual

1
Thank you,
On behalf of everyone at HYD·MECH Group Limited, we would like to thank and congratulate you on your decision to
purchase a HYD·MECH bandsaw.
Your new machine is now ready to play a key role in increasing the efciency of your operation, helping you to reduce cost
while boosting quality and productivity.
To ensure you are maximizing the power and versatility of your new HYD·MECH bandsaw, please take the time to
familiarize yourself and your employees with the correct operation and maintenance procedures as outlined in this
manual.
We sincerely appreciate the condence you have demonstrated in purchasing our product and look forward to building a
long and mutually benecial relationship.
Thank you
Hyd·Mech Group Limited
P.O. Box 1659, 1079 Parkinson Road
Woodstock, Ontario, N4S 0A9
Phone : (519) 539-6341
Service : 1-877-237-0914
Sales : 1-877-276-SAWS (7297)
Fax : (519) 539-5126
e-mail : info@hydmech.com
PRINTED DEC 2013
H18A-120 & H22A-120

Hyd-Mech H22A-120 Specifications

General

Type	Horizontal Band Saw
Model	H22A-120
Category	Saw
Voltage	230/460 V
Phase	3

Summary

Safety Instructions

Safety Instructions Summary

Provides a brief overview of critical safety information and mandatory reading sections.

Basic Safety Rules

Operator and Maintenance Personnel Responsibilities

Defines the duties of operators and maintenance staff regarding safety equipment and procedures.

Installation Procedures

Installation Safety Precautions

Essential safety measures to follow during the installation process of the bandsaw.

Machine Placement and Anchoring

Electrical and Fluid Connections

Operating Instructions

Blade Basics and Setup

Covers blade fundamentals, break-in procedures, and essential monitoring points for blade life.

Variable Speed and Control Panel

Explains variable blade speed adjustment and the functions of the main control panel.

PLC Control System Overview

Introduces the PLC system, its interface, and basic operation principles.

Manual and Single Cut Modes

Describes operation in Manual Mode and how to perform a Single Cut.

Automatic Operation Modes

Explains Automatic Operation, including job programming and auto cycle sequence.

Queue and Repeating Queue Operation

Parameter Settings

Hydraulic Feed Control

Cutting Parameters Chart Usage

Guides on using the chart to determine optimal blade pitch, speed, and feed rate.

Maintenance Procedures

Maintenance Safety and Lock-Out

Critical safety protocols including lock-out/tag-out procedures before performing maintenance.

Blade Change and Handling

Procedures for changing the blade, including mode selection and safe blade handling.

Blade Removal and Installation

Blade Tracking and Brush Adjustment

Drive Wheel Tracking and Lubrication

Hydraulic System Maintenance

General Troubleshooting

Identifies common problems and provides solutions for saw operation issues.

PLC Troubleshooting

Specifications

H18A-120 Bandsaw Specifications

H22A-120 Bandsaw Specifications

Warranty Information