Need help?Do you have a question about the Hyd-Mech H-22A and is the answer not in the manual?
Essential safety rules for safe installation, operation, and maintenance of the saw.
Guidelines for safely lifting and handling the H-18 and H-22 bandsaw models.
Procedures for selecting location, leveling, and anchoring the machine securely.
Instructions for making electrical power hook-ups, including phase order checks.
Details on the control console, including startup procedures and manual operation.
Explanation of the functions of various switches and buttons on the operator control panel.
Overview of the PLC system, its capabilities, and operation modes.
Procedure for cutting a single piece to a desired length using manual mode.
How to set up and run jobs in automatic mode, including job programming.
Guidance on setting up the saw for optimal cutting situations and blade care.
Purpose and procedure for safely locking out the machine during maintenance.
Instructions for safely changing the saw blade.
Common problems, probable causes, and solutions for saw operation.
Overview of the Mitsubishi PLC, its battery, inputs, and outputs.
Definitions and purposes of various PLC parameters for machine calibration.
Troubleshooting guide for common issues with the PLC and length measurement.
Diagnosis for issues preventing the completion of automatic cutting cycles.
Detailed diagrams of the hydraulic system and plumbing.
Information on optional assemblies available for the machine.
Technical specifications for the H-22 model bandsaw.
Detailed dimensions and capacities of the H-22 model.
Terms and conditions of the manufacturer's warranty for the bandsaw.
To Next Page
General
