Hydac EDS 3000 - Page 11

11
EDS 3000 Operating Manual
PN#02080105 • ELC1603-1752 / 09.16
ELECTRONICS
Setting Display Setting Range Pre-Setting
Display
SLOW /
MEDI /
FAST
MEDI
Display reacts slowly to
pressure variations
Display reacts at standard rate
to pressure variations
Display reacts quickly to
pressure variation
Pressure Range Scale
BAR /
PSI /
MPa /
FREE
PSI
Pressure in Bar.
Pressure in PSI
Pressure in MPa
When shifting between bar, PSI, MPa, the
EDS 3000 changes all switching points
adjustments into chosen unit automatically.
The normal range can be
scaled freely. If this adjustment
is selected, the decimal place
as well as upper and lower
range limits must be adjusted.
Example: If the range has been changed to
0 to 215.5, the display value 215.5 corre-
sponds to the maximum pressure capable
of being measured by the EDS. Application:
Display other scales like KN, Kg, etc.
Decimal Place
0.00 to 0.000 0.0
(only in “rang”= “free” setting)
No. of decimal places, that the EDS 3000
displays
Low Range
0.00 to 99.99s 0
(only in “rang”= “free” setting)
Lower display range limit
High Range
(only in “rang”= “free” setting)
upper display range limit
-999 to 9899
Measure
range nal
value