5
EDS 3000 Operating Manual
PN#02080105 • ELC1603-1752 / 09.16
ELECTRONICS
Warning:
The EDS 3000 must be screwed in using a suitable wrench via the pressure con-
nection.
If the EDS 3000 is not fitted correctly, e.g. if the housing is turned manually, the
housing could be damaged, or made completely inoperable, due to the swivel func-
tion of the EDS 3000.
Additional assembly notes which, from experience, reduce the effect of electromag-
netic interference:
• Make screened connections as short as possible.
• Use screened lines (e.g. LIYCY 4 x 0.5 mm2).
• The cable screening must be fitted by qualified personnel subject to the
ambient conditions and with the aim of suppressing interference.
• Direct proximity to connecting lines of user units or electrical or electronic units
causing interference must be avoided as far as possible.
3. Operating keys of the EDS 3000
mode
Keys for adjusting menu
4-digit
display
Display of the
pressure unit
switching point
SP1 SP2
To Next Page
Loading...
