16 HNS 526
Version: 06.10.2014 HYDAC ELECTRONIC GMBH Part No.: 669869
E
9 Menu navigation
In order to adapt the HNS 526 to a particular application, the function can be altered via
multiple settings. These settings are combined in a menu.
Notes:
■ If no key is pressed for approx. 60 seconds, the menu closes automatically, and
any changes that may have been made will not be saved.
■ If both keys are pressed at the same time, the menu closes automatically and any
changes made are saved.
■ A parameter value will flash in the display. When adjusting a parameter using key
T1, the value does not flash. Hold down T1, to scroll through the parameter values.
■ When an adjusted parameter is confirmed, the set value is displayed for a second
before returning to the relevant menu point.
In order to prevent unauthorised adjustment of the instrument, a key-lock can be set.
There are two independent methods of locking the keys.
a) Press T1 + T2 for 10s
b) After disconnecting the voltage, press T1 + T2 for 5s
When the keys have been locked using one method, they can only be unlocked using the
same method.
If a key is pressed when the sensor is locked "Loc" is displayed.
To Next Page
