22
Draining Your Spa
To drain your spa, perform the following steps:
1. Turn the power off. (Turn breaker off).
2. Select a safe, suitable drainage area capable of safely assimilating 300 plus gallons of water,
which may contain both unsanitary contaminants and chemical residue that could cause harm to
plants or grass.
3. Locate drain valve at front of the spa of outside of pan bottom. See Fig. 3,10. Hold the rear
body to prevent it from turning, then loosen and remove the front cap to expose male hose threads.
4. Attach garden hose to the exposed threads.
5. Twist the drain fitting 1/3 turn counterclockwise to unlock the drain valve and pull it outward to
open completely. The spa water will drain by gravity flow.
6. After the spa drains, perform steps 3-5 in reverse order to close the drain prior to refilling spa.
7. After refilling, turn on the power to the spa and follow the steps listed under “Start-Up Instructions.
SPA CARE AND MAINTENANCE
Spa Drain Fitting
w/Cap Removed.
Attach Garden
Hose.
Figure 10
Spa Drain Fitting
w/Cap Installed
Cap
Drain Fitting
Hose Thread
Cap
Garden Hose
Pull Out
Pull Out
Spa Drain Fitting
Attached with
Garden Hose.
Rear Body
To Next Page
Loading...