Hydropool Serenity 45L - Protec Ng Your Cabinet Wood Finish; So Stride Floor System

36
PROTECTING YOUR CABINET FINISH
Some HYDROPOOL hot tub cabinets are made from Dura synthec plasc material. These cabinets ulize a
magnec latching system to fasten and hold the exterior panels in place. In order to remove a panel for access
you need to start at the lower right hand corner of the panel and disengage the first magnec latch by pulling
the panel forward enough to allow your hand to get behind the panel. Once you have done that you can run
your hand behind the panel to disengage the other magnec latches and be able to remove the panel
completely.
To reinstall the panel, line the panel up in the opening and li it in place and the magnec latches will engage
with the panel so you can shi it place and complete the reinstallaon.
SOFT STRIDE FLOOR SYSTEM
The exclusive So Stride Floor System is available as a standard feature on the 4300, 4500, 5900, 6600, 6800,
6900 and SE45L Serenity models to provide a beer grip, tracon and comfort on both the steps and floor of
the spa. Making your spa safe and easy to use while geng in and out.
Care & Maintenance Recommendaons:
· So Stride Floor System cleans easily with soap, hot water and a brush (so to medium bristle sffness).
Chlorine/bleach and water mixture, isopropyl rubbing alcohol or other household cleaners such as
SoScrub, Simply Green and 409 can be used to clean the pads.
· Be sure any soap or cleaning product is thoroughly rinsed from the pads and spa shell and this residue is
removed before refilling the spa to prevent foaming.
· Always promptly aend to and clean any noceable stains.
Never:
· Allow coloured an-freeze to puddle or dry on the mat.
· Allow stains to develop without promptly being aended to and cleaned.
· Clean with acid based cleanly products.
· Use acetone or mineral spirits on the pads or spa shell as damage caused to the spa shell from these
chemicals will void the warranty.