13
NORTH AMERICA – GFCI INSTALLATION
Installation of the GFCI – Circuit Breaker, including ampere sizing and selection of conductor size and
type, must be performed by a qualified electrician in accordance with the National Electric Code, or the
Canadian Electrical Code, and all Federal, State/Provincial and local codes and regulations in effect at
the time of installation. Hydropool highly recommends the use of a new Siemens GFCI breaker for all
of its products. Other GFCI’s and older Siemens GFCI’s may have tripping issues.
SIEMENS – 240 VOLT TYPICAL
LEVITON – 120 VOLT TYPICAL
To Next Page
Loading...
