34
CLEANING THE ACRYLIC SURFACE
The acrylic surface can be cleaned and polished using a soft cloth and acrylic cleaner, available at your
Hydropool Retailer.
Important: Do not use detergents - the remaining residues will adversely affect water chemistry,
making it difficult to maintain proper water balance
Do not use abrasive cleaners - damage to the acrylic surface will occur.
SAFETY HARD COVER
When a hot tub is uncovered, over 90% of heat is lost from the water surface. This evaporation also affects the
chemical balance and could create humidity problems indoors. HYDROPOOL Safety Hard Covers are
engineered for maximum thermal efficiency and appearance. They are hinged in the middle for easier
handling, and the zip fastener allows the tapered foam inserts to be changed if damaged. The skirt of the
safety hard cover overlaps the lip of the hot tub for a finished fit. The locks, with one part fastened to the deck
or skirt, prevent small children or animals from entering the hot tub. Do not drag the safety hard cover across
the hot tub or decking. Standing on the hardcover could cause the tapered foam inserts to crack, which will
lead to water absorption.
NEVER LEAN OR STAND ON YOUR HARDCOVER.
The cover should be cleaned at least twice a year with a vinyl moisturizer and protector.
NOTE: ALWAYS ENSURE THE SAFETY HARDCOVER IS IN PLACE AND LOCKED WHENEVER THE
HOT TUB IS NOT BEING USED. FAILURE TO DO SO MAY CAUSE DAMAGE OR CRACKING OF THE
ACRYLIC SURFACE NOT COVERED UNDER THE WARRANTY.
To Next Page
Loading...
