35
PROTECTING YOUR CABINET FINISH
Some HYDROPOOL hot tub cabinets are made from Dura synthetic plastic material. These cabinets utilize a
magnetic latching system to fasten and hold the exterior panels in place. In order to remove a panel for access
you need to start at the lower right hand corner of the panel and disengage the first magnetic latch by pulling
the panel forward enough to allow your hand to get behind the panel. Once you have done that you can run
your hand behind the panel to disengage the other magnetic latches and be able to remove the panel
completely.
To reinstall the panel, line the panel up in the opening and lift it in place and the magnetic latches will engage
with the panel so you can shift it place and complete the reinstallation.
SOFT STRIDE FLOOR SYSTEM
The exclusive Soft Stride Floor System is available as a standard feature on the 4300, 4500, 5900, 6600, 6800
and 6900 Serenity models to provide a better grip, traction and comfort on both the steps and floor of the spa.
Making your spa safe and easy to use while getting in and out.
Care & Maintenance Recommendations:
Soft Stride Floor System cleans easily with soap, hot water and a brush (soft to medium bristle stiffness).
Chlorine/bleach and water mixture, isopropyl rubbing alcohol or other household cleaners such as
SoftScrub, Simply Green and 409 can be used to clean the pads.
Be sure any soap or cleaning product is thoroughly rinsed from the pads and spa shell and this residue
is removed before refilling the spa to prevent foaming.
Always promptly attend to and clean any noticeable stains.
Never:
Allow coloured anti-freeze to puddle or dry on the mat.
Allow stains to develop without promptly being attended to and cleaned.
Clean with acid based cleanly products.
Use acetone or mineral spirits on the pads or spa shell as damage caused to the spa shell from these
chemicals will void the warranty.
To Next Page
Loading...
