24
OPTIONAL HYDROCLEAR PUREWATER SYSTEM
HOW IT WORKS
This system combines the benefits of both Ozone and UV-C sanitization utilizing a patented UV Chamber to
both inject ozone into the water, mix it and then expose it to powerful UV-C rays, all-in-one. This process not
only kills and deactivates microorganisms in the water it passes, but also creates a powerful hydroxyl radical to
burn off contaminants and dissolved solids within the water to significantly increase the clarity of the spa water.
The UV-C rays also breakdown chloramines which are the main cause of respiratory, eye and skin irritation
typically associated with chlorine. Harmful/corrosive off gassing is also dramatically reduced through this
process.
MAINTENANCE AND SERVICE
While operating, check regularly to see if bubbles are entering the spa.
After 10,000 hours the UV LED will begin flashing yellow indicating its time to replace the UV-C lamp.
Replace the check valve assembly annually to ensure continued optimal performance from the Hydroclear
Pure Water System.
To replace the UV-C lamp or check valve please go to www.balboawatergroup.com/UVSanitizers for the
procedure on how to do this.
IMPORTANT
YOU MUST CONTINUE TO CHECK YOUR WATER CHEMISTRY REGULARLY AND SOME SANITIZING
CHEMICALS WILL STILL BE NECESSARY TO TREAT THE WATER. CONSULT YOUR SPA
PROFESSIONAL FOR FURTHER ADVICE.
To Next Page
Loading...
