Page 1
D.2120
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com
Fixture May Show Some Available Options
Please visit www.acorneng.com for most current specifications.
®
Dura-Ware 2120 Series
Siphon Jet Toilet - On Floor - Floor Outlet
Flush Valve supply is additionally available for exposed or concealed flush valve styles in 1.28
GPF, 1.6 GPF or 3.5 GPF with 1-1/2” NPT connection.
Siphon Jet Toilet - On Floor - Floor Outlet
GUIDE SPECIFICATION
Provide and install Acorn Dura-Ware Siphon Jet Toilet (specify model number and options).
Fixture shall be fabricated from 16 gage, type 304 stainless steel. Construction shall be
seamless welded and exposed surfaces shall have a satin finish with an integral contoured toilet
seat. Toilet shall be concealed siphon jet type with an elongated bowl and a self-draining
flushing rim. Toilet shall be ASME A112.19.3-2008 and CSA B45.4-2008 compliant. Toilet
requires a minimum of 25 PSI flow pressure and uses a minimum water consumption of 1.28
GPF. Toilet trap shall have a minimum 3-1/2" seal that shall pass a 2-1/8" diameter ball and be
fully enclosed. Toilet waste outlet shall be 7-1/2" Gasketed Waste with 6" mounting centers.
Connecting hardware provided by installer.
Fixture is arranged to be installed on finished wall from the front side. It is fabricated from 16
gage, type 304 stainless steel and is seamless welded construction. Exterior has a satin finish
with an integral contoured seat. The inside of the toilet bowl also has a satin finish. Wall flange
is reinforced for maximum strength.
Toilet is Siphon Jet type with elongated bowl manufactured to comply with ASME A112.19.3-
2008 and CSA B45.4-2008 standards. Toilet requires a minimum of 25 PSI flow pressure and
uses a minimum water consumption of 1.28 GPF. Trap has a minimum 3-1/2" seal, will pass a
2-1/8" ball and is fully enclosed. Toilet has a 1-1/2” NPT flushing inlet connection and a 7-1/2"
gasketed waste with 6" mounting centers. Connecting hardware provided by installer.
2120-W-3-CN
Revised: 03/15/19
To Next Page
Loading...
Need help?
General