Page 1
D.2162
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com
Fixture May Show Some Available Options
Please visit www.acorneng.com for most current specifications.
®
Dura-Ware 2162 Series
Washout Urinal
Exposed Mounting Screws are furnished. No concealed wall fasteners or anchor shields are
furnished.
Provide and install Acorn Dura-Ware Washout Urinal (specify model number and options). Urinal
shall be back wall washdown type. Fixture shall be fabricated from 14 gage, type 304 stainless
steel and shall have coved corners to facilitate cleaning. Urinal shall meet ASME A112.19.3 and
CSA B45.4 requirements. All welds shall be continuous and exterior surfaces shall have a satin
finish. P-trap shall be fully enclosed. Fixture shall be furnished with exposed mounting screws.
Urinal is washout type with back wall washdown manufactured to ASME A112.19.3 and CSA
B45.4 requirements. Flushing inlet connection is 3/4" NPT male. Bottom of urinal is sloped to a
high capacity stainless steel beehive dome strainer. Strainer is secured with tamper-resistant
screws. P-trap has a minimum of 2" seal.
Washout Urinal
Fixture is arranged to be installed on finished wall and serviced from the front side. Fixture is
fabricated from 14 gage, type 304 stainless steel and is seamless welded construction. Exterior
has a satin finish. Interior has a matte finish. Fixture has a back wall washdown, and is
optionally available with a continuous flushing rim that washes all four walls. Corners are coved
to facilitate cleaning. P-trap is fully enclosed. Back of fixture is sound-deadened with fire-
resistant material.
GUIDE SPECIFICATION
2162-W-1-FV-28982162-T-1-FV
Revised: 08/21/18
To Next Page
Loading...
Need help?
General