Protection
Built in RCD: Internal 6mA DC ground fault current detection (compliant with BS
7671:2018). !
Built in PEN Fault: Comes with integrated PEN fault protection compliant with
Amendment 2 of BS7671:2018.!
Current Limit: Power and energy monitoring as standard; optional MID grade metering
is available.!
Overcurrent protection: Upstream circuit breaker (not supplied)!
Mechanical impact protection: IK08"
Product Information
Model: Hypervolt Home 2.0!
Connection Capacity: Single Phase, 7kW AC!
Charging Connector: Tethered, IEC 62196/Type 2 OR SAE J1772/Type 1!
Tethered Cable Length (m): 5 / 7.5"/ 10!
Dimensions (mm): 328 (H) x 243 (W)" x 101(D)"!
Mounting Type:! Wall/Pole mounted!
Colour:! Ultra White/ Ultra Black / Space Grey!
Weight: 5.2 Kg!
Unit Material: ABS composite!
Charging Protocol / Mode : Mode 3 (compliant with IEC 61851-1)
Electrical Properties
Rated supply voltage: 230V AC - Single Phase" (± 10% AC)"!
Rated power: 7.4 kW !
Output supply: AC 230V 7.4 kW Single Phase !
(Note: May vary based on vehicle make and model as well as electrical installation setup.)"!
Mains Frequency: 50 Hz!
Rated impulse withstands voltage: 4000V !
Rated peak withstands current: 1000A @ 1ms"
Energy Monitoring: Power and energy monitoring via. MID grade meter.!
Rating against shock: Class I Equipment !
Type of system earthing: TN-C-S & TN-S (PEN Fault Protection) or TT"
Electromagnet Compatibility (EMC): Classification Type B "
Connectivity
WiFi: Wi-Fi 802.11b/g/n @2.4 GHz"!
Bluetooth: Adoption via bluetooth low energy!
GPRS/3G/4G: Optional!
Network Security: State-of-the-art Cryptography Engine for fast and secure WLAN
Connections with 256-Bit Encryption.""!
App: Charger control functions via the Hypervolt app.
Standards and Compliance!
EMC Compliance: EN 61000-6-3:2006, EN 61000-6-2:2019!
Safety Compliance: Low Voltage Directive (LVD) 2014/35/EU, EN 60950-1:2006 + A11 +
A1, EN 60950-22:2006!
EV Charging Compliance: Fully compliant with Amendment 1 of BS7671:2018. EN
61851-1:2019, EN 61851-21:2002, EN 61851-22:2002, IEC 62196-1, IEC 61851-1, BS
7671:2018 + A1:2020.
Environment#!
Operating Temperature: -25 to 40 °C!
Operating Humidity: Up to 95% RH, non-condensing!
Environmental Protection: "IP54!
Pollution degree: 3"
Maximum Altitude Level: 2000m
Features
Status Indication/HMI: Multi-colour LED ring along the side of the enclosure and via
the logo on the front of the enclosure."!
Charging modes: Eco, Super Eco and Boost!
Additional
Access: Non-restricted !
Use: Can be operated by ordinary people. (Keep clear of children / the unit should only
be opened for servicing and repairs which should be conducted by Hypervolt approved
personnel only, please see page 3 for safety notice).
To Next Page
Loading...
