HyperX cloud ii User Manual

Usage (with Airplane Adapter)
If you are connecting the Cloud II headset to an airplane jack, you will not be using the USB control box. Just connect
the headset audio jack to the airplane adapter (included with your headset) and plug directly into the airplane jack
located on the front or inner side of the seat’s armrest.

HyperX cloud ii Specifications

General

Cable length	1 m
Headset type	Binaural
Product type	Headset
Plug and Play	Yes
Product color	Black, Red
Wearing style	Head-band
Control unit type	External control unit
Recommended usage	Gaming
Compatible products	PC\\r Mac\\r PS4\\r Xbox One
Registered	No
Memory layout	1 x 0 MB
Power handling	0.15 W
Internal memory	0 MB
Transducer type	Back electret condenser
Capsule diameter	6 mm
Current consumption	0.5 mA
Operating principle	Pressure gradient
Module configuration	(N/A) (N/A)
Open circuit voltage	20 mV/Pa
Power supply voltage	2 V
Audio output channels	7.1 channels
Extension cable length	2 m
Microphone boom length	150 mm
Sound pressure level (nominal)	98 dB
External control unit interface	USB
Weight (with microphone and cable)	350 g
Impedance	60 Ω
Driver type	Dynamic
Driver unit	53 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	15 - 25000 Hz
Total Harmonic Distortion (THD)	2 %
Material	Memory foam, Plastic
Connectivity technology	Wired
Microphone type	Boom
Microphone frequency	50 - 18000 Hz
Microphone sensitivity	-39 dB
Microphone connectivity	3.5 mm
Microphone direction type	Cardioid
Microphone input impedance	2200 Ω
Quantity	1
Headband pressure	5 N

Weight and Dimensions

Weight	320 g