Product description
Type remarks
Firmware version 1.2 (July 2011)
Features
2x UcD400OEM amplifier
Switch mode power supply
Balanced audio in
Balanced audio through loop
Two channel active filtering
Fully user-configurable filters
Firmware update by USB
DSP supply voltage dependant clip limiter
Digital version with AES/EBU input
Applications
This module can be used for the following setups:
Active 2-channel system
Active power sub-woofer
And with 2 modules it is also possible to set up a 3-channel system with one module for the separate
Subwoofer, and a second module for the top in a 2-channel system.
Use only
onlyonly
only a version 1.4 or higher of the Hypex Filter Design program! In earlier versions the PSC is
not yet implemented.
The first time the PSC2.400 is used all biquads are zero, so there are no filters installed
When you switch to Bridged mode please be sure to connect your speakers like described in this
manual
Do note that the Firmware update differs to the AS2.100 firmware update.
After updating the firmware please use the combining PC software downloaded from our website,
www.hypexshop.com
To Next Page
Loading...