Hypontech HPS-6500D - 5.3.2 Grid connection

To Next Page

To Previous Page

4 mm² 59 m 44 m 27 m

6 mm² 89 m 67 m 40 m

Conduc

tor

cross-

section

Maximum cable length

HPS-3680/

HPS-

3680D

HPS-4000/

HPS-

4000D

HPS-5000/

HPS-

5000D

HPS-6000/

HPS-

6000D

HPS-6000/

HPS-

6000D

4 mm² 25 m 20m 16m 12m 10m

6 mm² 40 m 30m 24m 20m 16m

The required conductor cross-section depends on the inverter rating, ambient

temperature, routing method, cable type, cable losses, applicable installation

requirements of the country of installation, etc.

5.3.2 Grid connection

Procedure:

1. Switch off the miniature circuit-breaker and secure it against being inadvertently

switched back on.

2. Insert the conductor into the suitable ferrule acc. to DIN 46228-4 and crimp the

contact.

Other manuals for Hypontech HPS-6500D