25 HPT USER MANUAL
Power quality response modes Default operation per AS/NZS 4777.2:2015
Volt-watt response mode Default: Enabled
Volt-var response mode Default: Disabled
Fixed power factor mode Default: Disabled
Reactive power mode Default: Disabled
Characteristic power factor curve
for cos φ (P)
Default: Disabled
Note
The power quality modes can be enabled or disabled via our monitoring APP or Web.
Please refer to the “Safety Parameter Setting User Manual” on our website at
https://www.hypontech.com/xiazai, or contact our servicer for more information.
Please access the monitoring platform on www.hyponportal.com/signin
To Next Page
Loading...
