17
Knob Control Commands Part 1 of 2: for the HTDF366NG/HTDF366LP Models
●
The knob labeled 1 is for the optional/alternate bottom gas oven burner- the bottom
oven burner can be used for baking foods inside the oven, but can not be used at
the same time as the electrical oven. The gas oven baking temperatures range from
slightly under 300 Fahrenheit to slightly over 500 Fahrenheit.
●
The knob labeled 2 is an indicator light that turns on when the oven is in use.
●
The knob labeled 3 is the oven electrical oven baking element knob, you are able to
select between two baking cycles: normal or rapid heat technology
Rapid Heat Technology Icon: A unique feature offered by the electrical
oven, allows the user to rapidly bake, broil, pre-heat or self-clean the oven. The icon
is very similar to the normal bake icon in appearance, the only difference is the extra
horizontal line above the flame symbol, indicating two solid heating elements are on
at their maximum setting simultaneously.
Normal Baking Icon: Is a great feature for the everyday cook that simply needs to
use their oven for normal baking functionality.
●
The knob labeled 4 is the electrical oven temperature control knob, and it must be
turned on with the timer & the electrical oven baking element knob simultaneously,
in order for the electrical oven to work. The electrical ovens internal thermometer
sensor will automatically turn off the oven once it reaches the correct temperature
control dictated by the knob and turn back on when heat must be applied to
maintain the designated temperature, the knob ranges from 200 to 500 degrees
fahrenheit, and can attain much hotter fahrenheit settings if it is set for broil and
clean.
HTDF366 – Affluent Series Range Specifications
www.hypotheory.com
To Next Page
Loading...