What to do if my Hytera AP516 Two-Way Radio won't turn on?
If your Hytera Two-Way Radio won't turn on, it might be due to several reasons. First, the battery may be installed improperly; try removing and reattaching the battery. Second, the battery power may have run out; recharge or replace the battery. Finally, the battery may suffer from poor contact caused by dirtied or damaged battery contacts; clean the battery contacts to resolve this.
Why is my Hytera AP516 battery not charging?
Your Hytera Two-Way Radio battery may not be charging because the power adapter plug is not properly inserted into the socket. Try reconnecting the radio to the power adapter. Alternatively, the USB Type-C cable may be poorly connected. Try reconnecting the USB Type-C cable.
What to do if the voice is weak on my Hytera AP516?
If the voice is weak, discontinuous, or totally inactive during receiving on your Hytera Two-Way Radio, the signal may be weak. Make sure that the radio is within the signal coverage. Also, the volume may be low, so increase the volume. Finally, the speaker may be blocked or damaged, so clean the surface of the speaker.
What to do if Hytera AP516 keys do not work?
If the keys on your Hytera Two-Way Radio do not work, the keys may fail to function temporarily. In this case, restart the radio. If the problem persists, the keys may be damaged.
What to do if the LED indicator is abnormal on my Hytera AP516 Two-Way Radio?
If the LED indicator is abnormal on your Hytera Two-Way Radio, the indication may be abnormal. Restart the radio. If the problem persists, the LED indicator may be damaged.
General| Brand | Hytera |
|---|---|
| Model | AP516 |
| Category | Two-Way Radio |
| Language | English |
Provides instructions for charging the battery and explains LED status indicators.
Step-by-step guide on how to attach the belt clip to the radio.
Step-by-step guide to power the radio on and off.
Instructions for increasing or decreasing the radio's audio volume.
Process for navigating and selecting a channel zone.
How to choose a specific channel for communication.
To Next Page
