EasyManuals Logo

Hytera DIGITAL MOBILE RADIO User Manual

Hytera DIGITAL MOBILE RADIO
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
25
one of them via your dealer (Note: For the following operation
methods, we take the “Regular” type as an example).
Emergency Mode Description
Alarm
In this mode, you can send alarm
information to your companion
or control center by pressing the
programmed Emergency key, but
you cannot talk with them.
Alarm with Call
In this mode, you can send alarm
information by pressing the
programmed Emergency key. When
the icon
(analog channel) or
(digital channel)appears,
you can speak into the microphone,
allowing your voice and background
noise to be transmitted automatically
(you do not need to hold down the
PTT key).
Call Only
In this mode, press the programmed
Emergency key to go to the Revert
Channel. When the icon
(
digital channel) or
(analog
channel)appears, you can speak
into the microphone, allowing your
voice and background noise to be
transmitted automatically (you do not
need to hold down the PTT key).
Functions and Operations
Operation Methods for Analog Emergency
Alarm (None & HDC1200)
Operation: Press the programmed Emergency key to send
alarm information. The radio displays the icon
and
indication “Sending Alarm”, with red LED glowing. (None: If “Local
Emergency Alarm” is enabled via the programming software, an
alarm tone will sound.)
Three methods are available for you to exit the Emergency mode:
1. Once the emergency cycles expire, the radio will exit the
Emergency mode automatically.
2. Long press the programmed Emergency key.
3. Hold down the PTT key. The radio will transmit on the channel
on which the radio operates before entering the Emergency
mode. (HDC1200)
Alarm with Call (None & HDC1200)
Operation:
1. Press the programmed Emergency key to send alarm
information. The radio displays the icon
and indication
“Sending Alarm”, with red LED glowing. (None: If “Local
Emergency Alarm” is enabled via the programming software,
an alarm tone will sound.)
2. When the icon
appears, you can speak into the
microphone to make an emergency call.
3. When the icon
appears, you can receive. And when a call
is received, the icon
appears.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hytera DIGITAL MOBILE RADIO and is the answer not in the manual?

Hytera DIGITAL MOBILE RADIO Specifications

General IconGeneral
BrandHytera
ModelDIGITAL MOBILE RADIO
CategoryRadio
LanguageEnglish

Related product manuals