27
Operation:
1. Press the programmed Emergency key to send alarm
information. The radio displays icon
and text information
“Sending Alarm”, with red LED glowing.
2. When the icon
. appears, you can speak into the
microphone to make an emergency call.
3. When the icon
appears, you can receive. And when a
call is received, the icon
appears.
4. If the preset Voice Cycles expire, you can hold down the PTT
key to make the emergency call again (the radio displays the
icon
with red LED glowing). After the emergency call is
transmitted, release the PTT key to receive (the radio displays
icon
, with LED ashing orange rapidly). And when a
call is received, the icon
appears.
To exit the Emergency mode, long press the programmed
Emergency key.
Call Only
Operation:
1. Press the programmed Emergency key to go to the Revert
Channel, and the radio displays the icon
.
2. If the Alarm with Call to Follow feature is enabled, you can
speak into the microphone to make an emergency call when
the radio displays the icon
.
3. When the icon
appears, you can receive. And when a
call is received, the icon
appears.
4. If the preset Voice Cycles expire, you can hold down the PTT
key to make the emergency call again (the radio displays the
icon
, with red LED glowing). After the emergency call is
transmitted, release the PTT key to receive (the radio displays
icon
, with LED ashing orange rapidly). And when a call
is received, the icon
appears.
To exit the Emergency mode, long press the programmed
Emergency key.
Note: Your dealer may set the number of polite
retries and impolite retries number of voice cycles,
duration of each transmission and TX interval.
Horn & Lights
If the mobile radio receives an emergency alert, a call alert or
a private call and no key operation is made within the specied
period, it will alarm via the external alarm devices (speaker or
light). This feature is helpful for notifying the absent user.
Functions and Operations
To Next Page
Loading...
Need help?
General
