Hytera MNC360 - Cellular Network; Enabling the Cellular Data; Checking the Data Usage; Selecting the Network Type

User Manual
System Settings
11
Press the Navigation key to select Done, and then press the OK key.
6.3 Cellular Network
Before connecting to the cellular network, make sure that the Nano SIM card is installed and the cellular data
service is activated. When using a Nano SIM card make sure you use the Micro adapter to install your SIM.
Press the
Navigation
key to select
Cellular networks
, and then press the
OK
key. You can perform the following
operations.
6.3.1 Enabling the Cellular Data
Press the
OK
key again.
6.3.2 Checking the Data Usage
Press the Navigation key to select Mobile network settings, and then press the OK key.
Press the Navigation key to select SIM slot 1 or SIM slot 2.
Press the Navigation key to select Data usage, and then press the OK key.
You can keep track of your data usage and avoid exceeding the limit.
6.3.3 Selecting the Network Type
Press the Navigation key to select Mobile network settings, and then press the OK key.
Press the Navigation key to select SIM slot 1 or SIM slot 2.
Press the Navigation key to select Preferred network type, and then press the OK key.
Press the Navigation key to select the network, and then press the OK key.
6.3.4 Enabling the Data Roaming
Press the Navigation key to select Mobile network settings, and then press the OK key.
Press the Navigation key to select SIM slot 1 or SIM slot 2.
Press the Navigation key to select Data roaming, and then press the OK key.
You can still use cellular data even when you are outside of your network.
6.4 Airplane Mode
In Airplane mode, your radio automatically disconnects from the cellular network and WLAN. In this case, you cannot
use data services.
To enable or disable Airplane mode, press the
Navigation
key to select
More
, and then press the
OK
key twice.