Hytera MNC360 - Sound; Setting the Profile; Selecting the Speaker; Enabling the Emergency Broadcast

User Manual
System Settings
13
6.7 Sound
6.7.1 Setting the Profile
You can set the profile of the radio according to different scenarios.
Press the Navigation key to select Sound, and then press the OK key.
Press the OK key again.
Press the Navigation key to select Silent or Ringtone, and then press the OK key.
6.7.2 Selecting the Speaker
You can use the internal or external speaker according to different scenarios.
Press the Navigation key to select Sound, and then press the OK key.
Press the Navigation key to select Speaker, and then press the OK key.
Press the Navigation key to select Internal or External, and then press the OK key.
If you use an external speaker, ensure that the radio is connected to it.
6.7.3 Enabling the Emergency Broadcast
In case of emergencies, the emergency broadcast allows you to receive the relevant information through the radio.
Press the Navigation key to select Sound, and then press the OK key.
Press the Navigation key to select Emergency broadcasts, and then press the OK key.
Do one of the following:
 Press the Navigation key to select a broadcast type, and then press the OK key.
The options include Show extreme threats, Show severe threats, and Show AMBER alerts.
 Press the Navigation key to select Turn on notifications, and then press the OK key to enable or disable it.
 Press the Navigation key to select Alarm reminder, press the OK key, press the Navigation key to select
the frequency of alarm reminder, and then press the OK key again.
6.8 Storage
6.8.1 Checking the Storage Usage
Press the Navigation key to select Storage, and then press the OK key.