Hytera RD980 - Rd96 X;Rd62 X

Upgrade and Check
Upgrade Guide
12
Step 4 Press the Navigation Knob again to enter the “Radio Info” interface to check the repeater
information.
Step 5 Check whether the firmware version is A7.06.04.000, S7.06.04.000, N7.06.04.000 or
C7.06.04.000.
Step 6 Power off the repeater.
3.3.2 RD96X/RD62X
As no LCD is designed for RD96X and RD62X, the firmware information can only be checked via the
CPS of V7.06.02.006, do as follows:
Step 1 Power on the repeater.
Step 2 Use the CPS of V7.06.02.006 to read data from the target repeater.
Step 3 Click the “Radio Information” to check whether the firmware version is A7.06.04.000,
S7.06.04.000, N7.06.04.000 or C7.06.04.000.
Step 4 Power off the repeater.