Hytera TF-515 - Before Use; Inserting Batteries; Charging the Ni-MH Battery; Attaching the Belt Clip

3
3. Before Use
3.1 Inserting Batteries
You can use the Ni-MH battery provided by us or three AA alkaline batteries prepared by yourself.
To insert batteries, do as follows:
1. Slide the battery latch to the unlock position and then remove the battery cover.
2. Insert the Ni-MH battery or three AA alkaline batteries following the polarity indicated in the battery
compartment and the instruction on the batteries.
3. Put the battery cover into space and then slide the battery latch to the lock position.
3.2 Charging the Ni-MH Battery
 Use the specified power adapter to charge the battery.
 Read the Safety Information Booklet before charging.
Before initial use, fully charge the battery.
To charge the battery, do as follows:
1. Insert the USB plug of the power adapter into the USB port of the radio.
2. Plug the power adapter to a power outlet.
3.3 Attaching the Belt Clip
To attach the belt clip, do as follows:
1. Align the rails on the belt clip with the groove on the battery.
2. Press the belt clip downwards into place.