To Next PageTo Next PageWhat to do if my Hytera Portable Radio has abnormal disconnection during a call?
If your Hytera Portable Radio disconnects during a call, first check the signal strength when in TMO mode. Also, verify that you are not in an area where signals could be blocked, like a basement or tunnel, and confirm the other party isn't out of coverage. Finally, check the battery strength of your device.
What to do if I'm unable to make a call on my Hytera PT580H Plus F4 Portable Radio?
If you are unable to make a call using your Hytera Portable Radio, ensure that the signal strength is adequate and that your terminal is within network coverage. Additionally, verify that the party you are calling is also within network coverage.
Why is my normal call interrupted on my Hytera PT580H Plus F4 Portable Radio?
If your Hytera Portable Radio's normal call is interrupted, check whether a terminal is making a pre-emptive priority call or an emergency call.
What to do if network registration fails on Hytera PT580H Plus F4?
If you're experiencing issues with network registration or can't find a network on your Hytera Portable Radio, check the signal strength to ensure you're within network coverage. You may also need to contact your network administrator to confirm that your terminal has the necessary authorization. Also, check whether your terminal is in TMO mode.
Why can't I call a specific group on my Hytera PT580H Plus F4?
If you are unable to call or receive calls from a specific group on your Hytera Portable Radio, verify that your terminal is a member of the target group and is authorized to access it.
How to fix a Hytera Portable Radio that can't be powered on?
If your Hytera Portable Radio cannot be powered on, please check if the battery power is too low or if the battery is not functioning correctly.
Why am I unable to make a call in DMO mode on my Hytera PT580H Plus F4 Portable Radio?
If you cannot make a call in DMO mode on your Hytera Portable Radio, it may be because the called party is out of coverage or is not in DMO mode.
Why is half duplex transmission terminated on my Hytera PT580H Plus F4 Portable Radio?
The half duplex transmission of your Hytera Portable Radio is terminated because the overlong time of transmission makes the timer expire.
General| Operating Voltage | 7.4 V |
|---|---|
| GPS | Yes |
| Bluetooth | Yes |
| IP Rating | IP67 |
| Channel Spacing | 12.5/25 kHz |
| Vocoder Type | AMBE+2 |
| Frequency Range | 400-470 MHz |
| Battery | 2000 mAh (Li-Ion) |
| Display | Yes |
| Display Size | 1.8 Inch |
| Operating Temperature | -30°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Digital Protocol | DMR |
| RF Power Output | UHF: 4 W |
| Battery Life | Up to 12 hours |
| Dimensions | 125 x 55 x 37 mm |
| Battery Life (5-5-90 Duty Cycle) | Up to 12 hours |
| Weight with antenna & battery | Approx. 325g (with antenna & 1800mAh battery) |
Explains the meaning of icons used in the manual, including caution and note symbols.
Defines key operational terms like key presses and call types (Individual, Group, Telephone, Emergency).
Explains Direct Mode Operation (DMO) and Trunked Mode Operation (TMO) and their differences.
Defines Full Duplex and Half Duplex communication capabilities.
Describes the encryption method for protecting transmitted messages over the air.
Explains radio frequency, its applications, and potential radiation during use.
Details standards for safe exposure to RF radiation developed by experts.
Outlines FCC requirements for radio products and compliance with industry standards.
Lists all items that should be received in the package upon purchase for user verification.
Identifies and labels the terminal's physical controls and components using diagrams and part names.
Explains the layout of the function keypad and its associated keys.
Details how programmable keys can be set as shortcuts for quick access to functions or menus.
Instructions for charging the terminal battery using the charger and understanding LED indicators.
Guides on attaching the SIM card and the antenna to the terminal.
Details the steps for fitting and securing the battery onto the terminal.
How to attach the belt clip and connect other accessories via the accessory jack.
Critical warnings and steps to prevent and resolve issues related to water ingress into the terminal.
Illustrates and explains the various icons displayed on the terminal's LCD screen for status.
Lists and defines status icons for battery, signal, messages, and operation modes.
Explains the top LED indicator for different terminal statuses like transmitting, receiving, or low battery.
Instructions for turning the terminal on/off and adjusting call volume.
Guides on switching to and selecting the desired talk group.
Explains the procedure for locking and unlocking the terminal's keypad.
Details methods for switching the terminal between TMO and DMO modes.
How to transmit and receive individual calls in both DMO and TMO modes.
Instructions for transmitting and receiving group calls, including talk group limits.
How to receive and participate in duplex calls simultaneously.
Guides on making and answering telephone calls, including network requirements.
Explains how to initiate and terminate emergency calls for critical situations.
How to access, manage, and use the terminal's phonebook for contacts.
Details on creating status and user messages, including character limits and options.
How to manage received (Inbox) and sent (Outbox) messages, including reply and forward.
Describes managing drafted messages and viewing the call history.
How to customize alert volume and type for the 'Normal' profile.
Explains the 'Silent' and 'Vibration' profiles for notification behavior.
Introduces the main options available within the Settings menu.
How to configure date, time, format, brightness, keypad light, and screensaver.
Guides on setting up and managing PIN codes for terminal security.
Procedures for changing PIN codes and activating the Man Down safety feature.
How to reset all settings and access other utilities like My Info, Shortcuts, Calendar.
Details on managing talk groups via Selected List, Scan List, and folders.
How to enable/disable scanning and manage talk groups within the scan list.
Procedures for adding, deleting, and listing talk groups in static folders.
Switching modes, selecting language, and configuring GPS features.
Calibrating terminal time with GPS time and setting the time zone.
Methods for transmitting GPS data to individuals, groups, or control centers.
Setting the time zone and choosing between manual and auto send modes for GPS data.
Lists common terminal issues and their corresponding solutions for problem resolution.
Guidelines for maintaining the terminal's performance and cleaning its parts properly.
How to switch between Chinese Pinyin, English, Number, and punctuation input.
Guides on entering Pinyin for Chinese characters and selecting them.
Details on switching case, entering numbers, punctuation, and spaces.
Rules for dialing numbers based on length, including MNC+ISSI and MCC+MNC+ISSI.
