Hytera PT580H Plus F4 - Call Functions; Individual Call Procedures

19
Call
Individual Call
¾ Transmitting an Individual Call
DMO Mode
1. Input the number you want to call through the keypad, or go to the menu
PhoneBook or Call Log to select the contact you want to call.
2. Then hold down the PTT and speak into the microphone, to transmit a simplex
call.
TMO Mode
 Transmitting a call through menu
1. Go to the menu PhoneBook or Call Log to select the contact you want to call.
2. Hold down the PTT to transmit a simplex call, or press
to transmit a duplex
call.
 Transmitting a call through Manual Dial
1. Input the number you want to call through the keypad.
2. Press Ctype to select Private No (it will appear on the screen).
3. Hold down the PTT to transmit a simplex call, or press
to transmit a duplex
call.
Note: Entry of private number must comply with the SSI&TSI dialing rules. See
Appendix 2 SSI&TSI Dialing Rules for more details.
¾ Receiving and Responding to an Individual Call
DMO Mode
When the PTT is in released state, the terminal is always ready to receive calls.
When the other party stops talking, you can hold down the PTT to call back.
TMO Mode
 Simplex Call
When a simplex call is received, you can receive without any operation, unless the