Basic Safety Instructions for Handling
Make sure the reaction arm sits directly in contact with a suitable immovable object before you start to
tighten the nut.
Figure 9 - Reaction Arm Positioning
The use of the HYTORC Washer makes the use of external reaction arms unnecessary and thereby
contributes to an increase in the safety of the user. (See section “Overview HYTORC Washer”)
• Keep all body parts from the reaction point.
• Make sure the operator is safe and secure in place before starting.
• Make sure the square drive is seated correctly and completely onto the socket.
WARNING!
If the reaction arm is not in direct contact with an immovable object before you
start the fastening process. It could cause you to lose control of the tool and
get injured. Make sure that any part of your body is never in the path of the
reaction arm, (the immovable object in contact with the reaction arm) when the
nut is tightened, otherwise serious injury may occur.
14
BREAKTHROUGH PRODUCTS FOR INDUSTRIAL BOLTING
To Next Page
Loading...
Need help?
General
