Settings
L14
The Settings Menu provides options typically used upon initial setup or for a new project.
Units: Display torque in ft-lbs, N-m, kgf-m or % of maximum torque.
Clock: Set time and date.
Bluetooth: Configure Bluetooth settings.
Torque Limits: Set limits on Torque operations.
Angle Limits: Set limits on Angle operations.
Angle Delay: Adjust time between Torque, Angle, and Release.
Beeper: Turn notification beeper on or off.
Invert Screen: Flip screen (for when the Tool is inverted).
Icons: Turn the menu icons on or off.
Auto Shutdown: Enable/disable 5 minutes automatic shutdown.
Button Delay: Set button response time.
Work Light: Enable/disable the work light.
App Mode: Used to sync tool with HYTORC bolting software.
To Next Page
Loading...
