What to do if my Hytorc Stealth 22 ratchet does not take successive strokes?
If the ratchet does not take successive strokes, the square drive or the ratchet spring may be defective, requiring replacement. Also, ensure the piston fully retracts. Another possible cause is damage to the linkage between the piston rod and the drive plates, which would also require replacing the defective part.
Why does my Hytorc Power Tool lock onto the nut?
If the tool locks onto the nut, it is likely that the square drive is loaded at full torque. Use the disengagement lever to remove the tool from the nut or bolt.
General| Brand | Hytorc |
|---|---|
| Model | Stealth 22 |
| Category | Power Tool |
| Language | English |
Outlines fundamental safety rules for personnel, work area, and equipment use.
Provides specific safety guidelines for pump units, hoses, reaction arms, and sockets.
Details safe use and placement of reaction arms to prevent accidents and damage.
Defines the criteria and responsibilities for personnel operating the equipment.
Covers the working pressure and safety factor of hydraulic hoses.
Provides step-by-step instructions for connecting hydraulic hoses securely.
Details the procedure for safely disconnecting hydraulic hoses.
Explains how to connect the power supply for 230V and 400V electric pump units.
Lists essential checks to perform on the tool and system before operation.
Explains how to operate the tool using the remote control for electric and pneumatic units.
Details how to disengage the reaction pawl for easier tool removal.
Covers setting torque values using a pressure/torque chart and adjusting the pressure.
Guides on the procedure for tightening and loosening bolted flange connections.
Outlines routine maintenance tasks like oil and filter replacement.
Lists common problems with the tool and their possible causes and solutions.
Covers general troubleshooting for pump units and specific issues for electric units.
Addresses problems related to pneumatic pump units, such as air supply and ice buildup.
To Next Page