START SETUP MODE VIA THE KEY FOB
To set your I LOCK IT Pro to set-up mode via a connected
key fob, carry out the following steps:
I.
Make sure that the key fob is connected to your
I LOCK IT Pro.
II.
Press and hold the key fob button for at least 6 seconds and
then release the button.
I LOCK IT Pro switches to set-up mode
and the I LOCK IT button starts flashing blue.
START SETUP MODE VIA THE COLOR CODE
If you have lost your set-up smartphone or the key fob or if they
are defective, you can also start set-up mode using the color code
configured during initial set-up.
I.
Open your I LOCK IT Pro by entering your personal color
code, which you defined when you first set up the I LOCK IT
app.
To Next Page
Loading...