www.i2m.it/en
Motorcycle Channel and Alarm Assignment Tables
Assigned Channels
On the 2015 Yamaha R1 the parameters set1 and set2 are obtained by: mode, pwr, tcs scs for set1 and
lcs, qss, lif and ers for set2. A value of 1221 will then indicate mode = 1, pwr = 2, tcs = 2 and scs = 1. In
the same way the TC channel includes the intervention of Lif, slide control and TC, 101 for example
identifies the intervention of lif and tc.
On the 2016 Kawasaki: SET01 = 10000 * oil (on-off) + 1000 * KLCM ACTIVE + 100 * KLCM MODE + 10 *
KQS-UP + KQS-DOWN, Map / SKTRC = map + 10 * sktrc
KEBC = 10 * kebc setting + kebc mode
To Next Page
Loading...